Product ID:AS-P108 CATALYST
MSDS Date:08/01/1992
FSC:8010
NIIN:00-459-1756
Kit Part:Y
MSDS Number: BQCSB

CAAP CO INC

152 PEPES FARM RD
MILFORD, CT 06460-3670
US

Emergency Phone: 203-877-0375

Info Phone: 203-877-0375

Preparer: CHRISTINE L. SLEDGE

Cage: 60922

CAAP CO INC

MILFORD, CT 06460 US

Telephone: 203-877-0375

Cage: 60922

XYLENE (SARA 313)

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 65.9%

OSHA PEL 100 PPM/STEL 150 PPM

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYLISOBUTYLKETONE (MIBK) (SARA 313)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 23.9%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TRIETHYLENE DIAMINE

CAS: 280-57-9

RTECS: HM0354200

Fraction By Weight: 3.4%

DIPROPYLENE GLYCOL

CAS: 110-98-5

RTECS: UB8785000

Fraction By Weight: 6.8%

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: CONTACT MAY DAMAGE EYES,
IRRITATE SKIN, AND CAUSE RESPIRATORY IRRITATION UPON INHALATION.
CHRONIC: REPEATED OR PROLONGED EXPOSURE MAY CAUSE HEADACHES,
NAUSEA, VOMITING, AND COMA. INHALATION OF VERY HIGH CONCENTRATIONS
OR PROLONGED EXPOSURE MAY CAUSE NEURAL DYSFUNCTION, KIDNEY OR LIVER
DAMAGE.
Effects of Overexposure:VAPOR EXPOSURE: BURNING EYES, HEADACHE,
DIZZINESS, THROAT IRRITATION, LOSS OF APPETITE, NAUSEA. CONTACT:
MAY CAUSE IRRITATION OF SKIN, BURNING OF SKIN OR EYES.
Medical Cond Aggravated by Exposure:PREEXISTING ALLERGIES, EYE, SKIN
AND RESPIRATORY DISORDERS.

First Aid:EYES:FLUSH W/WTR 15 MIN, LIFT LIDS-GET IMMED MED AID. SKIN:
WASH W/SOAP & WTR. RMV CONTAM CLOTH-WASH BEFORE REUSE. IF
IRRIT/EXPOS SYMP EXISTS-GET IMMED MED AID. INHAL: RMV TO FRESH
AIR-GIVE ARTIF RESP IF NO BREATH-GET IMMED MED AID. INGEST: GET
IMMED MED AID. DO NOT INDUCE VOMITING-IF SPONTANEOUS-KEEP HEAD
BELOW HIPS TO PREVENT BREATH OF VOMITUS IN LUNGS-CHEM
PNEUMONITIS/PULMONARY EDEMA/HEMORRHAGE

Flash Point Method:TOC
Flash Point:68.0F,20.0C
Lower Limits:1.0
Upper Limits:8.0
Extinguishing Media:USE WATER FOG, DRY CHEMICAL, FOAM, OR CO2. DO NOT
USE A DIRECT WATER STREAM.
Fire Fighting Procedures:FIREFIGHTERS SHOULD WEAR SELF CONTAINED
BREATHING APPARATUS & FULL PROTECTIVE CLOTHING. USE WATER SPRAY TO
COOL NEARBY CONTAINERS AND STRUCTURES EXPOSED TO FIRE
Unusual Fire/Explosion Hazard:PROD-FLAMM LIQ. AVOID ACCUMULTN-MAY FLOAT
ON WTR-REIGNIT ON WTR SURFACE. EXTING ALL SRCS OF IGNIT-VAPOR
HEAVIER THAN AIR-TRVL DISTANCE TO IGNIT SOURCE/FLASHBACK

Spill Release Procedures:RMV IGNIT SRCS-DONT SMOKE IN AREA. WEAR
PROTECT EQUIP W/SOLVENT RESIST GLOVES/APRON/BOOTS/SCBA IN PRESS
DEMAND MODE/POSITIVE PRESS AIR-SUPPLIED RESP. DIKE & SOAK UP
W/ABSORB. CLEANUP ABSORB/CONTAIN. S WEEP/WET MOP W/SOAP & WATER.
VENT AREA.

Respiratory Protection:IF VAPOR/MIST, WEAR NIOSH RESP FOR EMISSION
LEVELS AT POINT OF USE. RESP W/FULL FACEPIECE/PURIFY CARTRIDGE RESP
FOR ORGANIC VAPOR/MIST, SCBA IN PRESS DEMAND MODE/POSITIVE PRESS
AIR-SUPPLD RESP. SPRAY APPLIC, SPRAY BOOTH
Ventilation:EXHST VENT TO KEEP CONC BELOW PEL. VENT AIR PAST OPRATR,
VAPOR SRC, THEN EXHST. FOLLOW GUIDELINES-"INDUSTRIAL VENT".
Protective Gloves:SOLVENT RESISTANT GLOVES.
Eye Protection:SAFETY GOGGLES OR SAFETY GLASSES.
Other Protective Equipment:SOLVENT RESISTANT APRON.
Work Hygienic Practices:EYEWASH/SAFETY SHOWER SHOULD BE NEARBY/READY TO
USE. WASH WELL WITH SOAP AND WATER AFTER HANDLING THE PRODUCT.
Supplemental Safety and Health
KEY1:F3. KIT CONSISTS OF EIGHT PARTS. PART ONE HAS PNI Q, PART TWO HAS
PNI R, PART THREE HAS PNI S ... THROUGH PNI X, SAME NSN. FORMULA
CHANGED.

HCC:F7
Boiling Pt:B.P. Text:241-281F
Melt/Freeze Pt:M.P/F.P Text:NA
Vapor Pres:8
Vapor Density:3.6
Spec Gravity:(H20=1): 0.869
pH:10
Viscosity:<10CPS AT 76F
Evaporation Rate & Reference:(BUTYL ACETATE=1): 0.85
Solubility in Water:PARTIAL
Appearance and Odor:CLEAR COLORLESS LIQUID WITH AROMATIC ODOR
Percent Volatiles by Volume:100%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, ALKALIS, AND HALOGENS.
Stability Condition to Avoid:ALL IGNITION SOURCES, HOT SURFACES, AND
TEMPERATURES ABOVE 100F (38C). DO NOT SMOKE IN IMMED AREA WHERE
PRODUCT IS USED.
Hazardous Decomposition Products:CARBON MONOXIDE/CARBON DIOXIDE/BLACK
SMOKE CONTAINING UNIDENTIFIED ORGANIC COMPOUNDS MAY BE RELEASED
DURING COMBUSTION.

Waste Disposal Methods:INCINERATION IN AN APPROPRIATELY DESIGNED AND
LICENSED INCINERATOR IS PREFERRED; THIS IS A RCRA HAZARDOUS
IGNITABLE WASTE. REGULATIONS MAY VARY FROM STATE TO STATE; DISPOSE
OF ACCORDING TO STATE, LOCA L, AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.